How to Use an Onahole

An onahole is a soft, stretchy sleeve designed for solo play. It’s typically made of TPE (thermoplastic elastomer), a body-safe material that mimics the feel of skin. Some are simple, while others have inner textures, suction chambers, or even heating features to make things more lifelike.

 

Step-by-Step: How to Use an Onahole

1. Start With Clean Hands and a Clean Toy

Before anything else, wash your onahole with warm water and mild, unscented soap (or a dedicated toy cleaner). It’s always a good idea to give new toys a rinse before their first use. This helps remove any dust or residue from packaging.

2. Apply Lube – Inside and Out

Lube is essential. Most onaholes are made of soft materials that can be damaged by friction without lubrication. You’ll want a water-based lube — silicone- or oil-based lubes can break down the toy's material over time.

  • Put a generous amount of lube inside the onahole. You can use your fingers to spread it evenly.

  • Add a bit to your penis as well to make insertion smoother and prevent pulling or discomfort.

3. Adjust the Grip for Sensation

One of the perks of onaholes is that you can control the pressure and suction manually. Here’s how:

  • Squeeze the toy to push out extra air. This creates a light vacuum that adds suction during use.

  • You can also experiment with hand placement: try gripping the base, middle, or tip of the toy to change the feel.

If the onahole has a closed end, squeezing different parts can increase the suction effect. Try different grips and speeds to find what feels best for you.

4. Warming Things Up (Optional)

Some users like to heat their toy or lube before use. This isn’t necessary, but it can add realism.

  • You can soak the toy (in a plastic bag) in warm water for a few minutes.

  • Use warm (not hot) lube, or try a heating pad wrapped around the toy for a few minutes.

Warning: Some toys may degrade faster with repeated heating. If you want your onahole to last, limit exposure to heat.

Cleaning and Drying Your Onahole

Keeping your onahole clean is just as important as using it right. Moisture inside the toy can lead to mold — which is not something you want near your body.

Cleaning Steps:

  1. Rinse thoroughly with warm water after each use.

  2. Use mild soap or a toy-safe cleaner to disinfect it.

  3. Shake out excess water or gently towel dry the outside.

  4. For the interior, consider:

    • Drying sticks

    • A small aquarium pump

    • Leaving the toy open near a fan

If your toy can open fully (like the Tenga Flip series), drying is much easier. If not, be patient and give it plenty of airflow.

 

Extra Care Tips

1. Powdering Your Toy

Over time, TPE toys can get sticky. After drying, you can dust the toy with cornstarch or talcum powder. This helps maintain a soft texture and prevents dust and lint from sticking.

  • Apply powder once the toy is completely dry.

  • Do this once a week or after every few uses depending on how sticky it feels.

2. Sterilizing with Alcohol (Optional)

You can use 70% isopropyl alcohol to sterilize the onahole after cleaning. It also helps with drying. Just make sure you don’t overdo it — alcohol can dry out the material over time.

3. Storage

Once it’s dry and powdered, store your onahole in a clean, dry place. You can use a cloth bag or a dedicated storage box. Avoid direct sunlight or heat.

 

Featured Products

How to Tell If Your Onahole Needs Replacing

With proper care, your onahole can last a long time. But watch for:

  • Strong or unusual odors that don’t go away

  • Discoloration or mold growth

  • Tears, cracks, or sticky areas that don’t improve with powder

If you see any of these, it’s time for a replacement.

 

Final Thoughts: Getting Comfortable With It

Using an onahole might feel awkward the first few times, especially if you’re used to your hand. Don’t stress. Take your time, experiment, and don’t be afraid to try different techniques, lubes, or toy styles.

For More Please Read:

DIY Onahole

What Is a Onahole?

Back to blog